DVG6565KR

Freestanding wall decorative cooker hood
Freestanding wall decorative cooker hood DVG6565KR
print
print
share
Facebook
Twitter
Code: 312583 Gorenje by Karim Rashid Freestanding wall cooker hood Control setting: Touch control Maximum extraction rate by extraction operation: 463 m³/h Airflow boost position (PowerBoost 1) - extraction: 623 m³/h Energy class: D Gorenje Gorenje by Karim Rashid Dimensions (W×H×D): 60 × 52.3 × 44.2 cm
DVG6565KR
WhiteShow both variations
click to collapse
P.A.S. System
Smart, targeted air extraction with less noise
Innovative perimetric aspiration system (P.A.S.) directs its extraction power to the edges. This approach reduces energy consumption and noise at the same time. As a result air extraction is considerably more silent and efficient.
Timer and refresh
Always fresh and punctual
Special advantages of new Gorenje hoods include setting the timing for automatic switching off and the refresh function which is activated every hour, refreshing the air for 10 minutes.
Useful tips
• Remember to switch the cooker hood on before starting to cook, as this maximises the hood’s capacity.
• Leave the cooker hood running for another 15 minutes once you have finished cooking to remove the last few traces of cooking odours.
• Remember never to open the kitchen window when using a cooker hood, as this affects air circulation and cancels out the low pressure.
• Choose a cooker hood that is at least as wide as your hob to achieve the best effect.
Which capacity do you need?
What sort of capacity should a new cooker hood have? Capacity depends largely on the size of the kitchen. A good rule of thumb is that the hood should be able to replace the air 10 to 20 times an hour. For instance, if a kitchen measures 4 x 4 m with a ceiling height of 2.5 m, the cooker hood should replace approximately 400- 800 m3 per hour.

There will always be some loss of pressure when installing a hood. That is why it is important to observe the following rules:

• Always observe the hood’s recommended venting diameter (O) specified on the venting tube or pipe.
• Where possible, use smooth pipes to minimise air resistance.
• Try to make the installation as short as possible and with as few bends in the pipes as possible.
• You want gentle curves in the pipe rather than sharp bends, so that the air can pass through unhindered, minimising pressure loss.

The necessary extraction capacity is determined by the volume of the kitchen. The volume of the kitchen space can be calculated as follows: width x height x depth. Calculation of the power of the hood needed: volume of the kitchen x 10.

Number of meters
Number of kinks = 1 m
Pressure loss in m3/h

Technical details

Freestanding wall cooker hood

Venting with air extraction or recirculation

Energy class: D

Material of housing/chimney: stainless steel and glass / stainless steel

Colour of housing/chimney: White / stainless steel

Lightning efficiency class: A

Grease filtering efficiency class: E

Fluid dynamic efficiency class: E

Maximum extraction rate by extraction operation: 463 m³/h

Venting tube diameter: 15 cm

Air flow by extraction version, step 1: 211 m³/h

Air flow by extraction version, step 2: 333 m³/h

Air flow by extraction version, step 3: 463 m³/h

Electronic control

Control setting: Touch control

Timer function

Number of speed positions: 3

Constant ventilation ReFresh

Lamp type: LED

On/off light switch

Number of lights: 4

Power of lights: 4 W

Airflow boost position (PowerBoost 1) - extraction: 623 m³/h

Perimetric suction

Filter material: Aluminium

Grease filter indicator

Coal filter code (optional as separate purchase): 322147

Washable grease filter

Number of motors: 1

Number of PowerBoost functions: 1

No return airflow flap: 150 mm

Noise level (max.): 54 dB(A)re 1 pW

Height: 523 mm

Min. height of the chimney: 465 mm

Max. height of the chimney: 916 mm

Annual energy consumption : 81.2 kWh

Dimensions (W×H×D): 60 × 52.3 × 44.2 cm

Dimensions of packed product (W×H×D): 72 × 55 × 63 cm

Net weight: 17.2 kg

Gross weight: 21.3 kg

Consumption in standby mode: 0.6 W

Connected load: 204 W

Nominal current of fuse: 10 amp

Code: 312583

EAN code: 3838942895838

Support